Материал: part03

Внимание! Если размещение файла нарушает Ваши авторские права, то обязательно сообщите нам

DICOM PS3.3 2020a - Information Object Definitions​

Page 461​

Note​

Attributes (0040,1006) Placer Order Number/Procedure and (0040,1007) Filler Order Number/Procedure were previously​ defined in DICOM. They are now retired (see PS3.3-1998).​

C.4.12 Imaging Service Request Module​

Table C.4-12. Imaging Service Request Module Attributes​

Attribute Name​

Tag​

Attribute Description​

ImagingServiceRequestComments​

(0040,2400)​

User-defined comments on the Imaging Service Request.​

 

 

Note​

 

 

This Attribute is intended to transmit non-structured​

 

 

information, which can be displayed to the operator of the​

 

 

equipment (e.g., Modality).​

Requesting Physician​

(0032,1032)​

NameofthephysicianwhorequestedtheImagingServiceRequest.​

Requesting Physician Identification​

(0032,1031)​

Identification of the physician who requested the Imaging Service​

Sequence​

 

Request.​

 

 

Only a single Item shall be included in this Sequence.​

>Include Table 10-1 “Person Identification Macro Attributes​

Note​

Description”​

 

The Person's Telecom Information (0040,1104) Attribute​

 

 

 

 

in this Sequence may be treated as equivalent to HL7v2​

 

 

field ROL-12 associated with the requesting physician​

 

 

identified in ORC-12 or OBR-16.​

Referring Physician's Name​

(0008,0090)​

Name of the Patient's referring physician for this Imaging Service​

 

 

Request.​

Referring Physician Identification​

(0008,0096)​

Identification of the Patient's referring physician.​

Sequence​

 

Only a single Item shall be included in this Sequence.​

 

 

>Include Table 10-1 “Person Identification Macro Attributes​

Note​

Description”​

 

The Person's Telecom Information (0040,1104) Attribute​

 

 

 

 

in this Sequence may be treated as equivalent to HL7v2​

 

 

field ROL-12 associated with the referring physician​

 

 

identified in PV1-8.​

Requesting Service​

(0032,1033)​

Institutional department, unit or service where the request initiated.​

 

 

See Note 3.​

RequestingServiceCodeSequence​

(0032,1034)​

Institutional department, unit or service where the request initiated.​

 

 

Equivalent to HL7 v2.x ORC-17.​

 

 

See Note 3.​

 

 

Only a single Item shall be included in this Sequence.​

>Include Table 8.8-1 “Code Sequence Macro Attributes”​

DCID 7030 “Institutional Departments, Units and Services”.​

Accession Number​

(0008,0050)​

A departmental IS generated number that identifies the order for the​

 

 

Imaging Service Request.​

Issuer of Accession Number​

(0008,0051)​

Identifier of the Assigning Authority that issued the Accession​

Sequence​

 

Number.​

Only a single Item shall be included in this Sequence.​

- Standard -​

Page 462​

DICOM PS3.3 2020a - Information Object Definitions​

Attribute Name​

Tag​

Attribute Description​

>Include Table 10-17 “HL7v2 Hierarchic Designator Macro​

 

Attributes”​

 

 

Issue Date of Imaging Service​

(0040,2004)​

Date on which the Imaging Service Request was issued by the​

Request​

 

requester.​

Issue Time of Imaging Service​

(0040,2005)​

Time at which the Imaging Service Request was issued by the​

Request​

 

requester.​

Placer Order Number / Imaging​

(0040,2016)​

The order number assigned to the Imaging Service Request by the​

Service Request​

 

party placing the order.​

Order Placer Identifier Sequence​

(0040,0026)​

Identifier of the Assigning Authority that issued the Placer Order​

 

 

Number.​

 

 

Only a single Item shall be included in this Sequence.​

>Include Table 10-17 “HL7v2 Hierarchic Designator Macro​

 

Attributes”​

 

 

Filler Order Number / Imaging​

(0040,2017)​

The order number assigned to the Imaging Service Request by the​

Service Request​

 

party filling the order.​

Order Filler Identifier Sequence​

(0040,0027)​

Identifier of the Assigning Authority that issued the Filler Order​

 

 

Number.​

 

 

Only a single Item shall be included in this Sequence.​

>Include Table 10-17 “HL7v2 Hierarchic Designator Macro​

 

Attributes”​

 

 

Order Entered By​

(0040,2008)​

The person who entered the Imaging Service Request into an​

 

 

Information System.​

 

 

Note​

 

 

This Attribute may be treated as equivalent to HL7v2 field​

 

 

ORC-10.​

Order Enterer's Location​

(0040,2009)​

The location at which the Imaging Service Request was entered.​

 

 

Note​

 

 

This Attribute may be treated as equivalent to HL7v2 field​

 

 

ORC-13.​

Order Callback Phone Number​

(0040,2010)​

TelephoneNumberatwhichadditionalinformationcanberetrieved.​

OrderCallbackTelecomInformation​

(0040,2011)​

The telecommunication contact information, including telephone,​

email, or other telecom addresses, at which additional information​ about the order can be retrieved.​

Note​

1.​This Attribute may have internal format or structure in​ accordance with local agreement or profile.​

2.​It is recommended that this Attribute be treated as​ equivalent to HL7v2 fields ORC-12 and OBR-17, and​ be formatted in accordance with the HL7v2 XTN data​ type (without escapes for HL7 message structure​ reserved characters).​

- Standard -​

 

DICOM PS3.3 2020a - Information Object Definitions​

Page 463​

Attribute Name​

Tag​

Attribute Description​

 

Admission ID​

(0038,0010)​

Identification number of the Visit as assigned by the healthcare​

 

 

provider​

 

 

 

Note​

 

 

 

Visit and Admission are used interchangeably here. In the​

 

 

broader sense, an admission is a type of visit at an​

 

 

 

institutionwherethereisanadmissionprocessforpatients.​

Issuer of Admission ID Sequence​

(0038,0014)​

Identifier of the Assigning Authority that issued the Admission ID.​

 

 

Only a single Item shall be included in this Sequence.​

 

>Include Table 10-17 “HL7v2 Hierarchic Designator Macro​

 

 

Attributes”​

 

 

 

Reason for Visit​

(0032,1066)​

Reason(s) for this visit by the patient to the facility or provider.​

Reason for Visit Code Sequence​

(0032,1067)​

Coded reason(s) for this visit by the patient to the facility or provider.​

 

 

Note​

 

 

 

If an HL7 message is available with a PV2 segment​

 

 

corresponding to this visit, potential codes may be found​

 

 

in Admit Reason PV2-3.​

 

 

 

One or more Items are permitted in this Sequence.​

 

>Include Table 8.8-1 “Code Sequence Macro Attributes”​

No Baseline CID is defined.​

 

Note​

1.​Attributes (0040,2016) and (0040,2017) Placer Order Number and Filler Order Number/Imaging Service Request are​ intended to convey the corresponding order numbers as defined in HL7, in the case where interoperability with an HL7​ environment is the objective.​

2.​Attributes (0040,2001), (0040,2006) and (0040,2007) were previously defined in DICOM. They are now retired (see​ PS3.3-1998).​

3.​Both Requesting Service (0032,1033) and Requesting Service Code Sequence (0032,1034) are defined in this table;​ the latter is preferred, but the former may be copied from an HL7 message whether or not there is also the ability to​ map it to a coded form (e.g., with only ORC-17 component 1 valued).​

C.4.13 Performed Procedure Step Relationship​

Table C.4-13 specifies the Attributes used to reference other SOP Classes and other Information Entities of the DICOM real-world​ model as defined in Section 7.3.1.6.​

Table C.4-13. Performed Procedure Step Relationship Module Attributes​

Attribute Name​

Tag​

Attribute Description​

Patient's Name​

(0010,0010)​

Patient's full legal name.​

Patient ID​

(0010,0020)​

Primary identifier for the Patient.​

Note​

In the case of imaging a group of small animals​ simultaneously, the single value of this identifier​ corresponds to the identification of the entire group.​ See also Section C.7.1.4.1.1.​

Include Table 10-18 “Issuer of Patient ID Macro Attributes”​

- Standard -​

Page 464​

DICOM PS3.3 2020a - Information Object Definitions​

Attribute Name​

 

Tag​

Attribute Description​

Patient's Birth Date​

 

(0010,0030)​

Date of birth of the named Patient​

Patient's Birth Date in Alternative​

 

(0010,0033)​

Date of birth of the named Patient in the Alternative Calendar​

Calendar​

 

 

(0010,0035).​

 

 

 

Note​

 

 

 

No format is specified for alternative calendar dates​

 

 

 

so none should be assumed.​

Patient's Death Date in Alternative​

 

(0010,0034)​

Date of death of the named Patient in the Alternative Calendar​

Calendar​

 

 

(0010,0035).​

 

 

 

Note​

 

 

 

No format is specified for alternative calendar dates​

 

 

 

so none should be assumed.​

Patient's Alternative Calendar​

 

(0010,0035)​

The Alternative Calendar used for Patient's Birth Date in​

 

 

 

Alternative Calendar (0010,0033) and Patient's Death Date in​

 

 

 

Alternative Calendar (0010,0034).​

 

 

 

See Section C.7.1.5 for Defined Terms.​

 

 

 

Required if either Patient's Birth Date in Alternative Calendar​

 

 

 

(0010,0033) or Patient's Alternative Death Date in Calendar​

 

 

 

(0010,0034) is present.​

Patient's Sex​

 

(0010,0040)​

Sex of the named Patient​

 

 

 

Enumerated Values:​

 

 

 

M​male​

 

 

 

F​female​

 

 

 

O​other​

Referenced Patient Sequence​

 

(0008,1120)​

Uniquely identifies the Patient SOP Instance.​

 

 

 

Only a single Item shall be included in this Sequence.​

>Include Table 10-11 “SOP Instance Reference Macro Attributes”​

 

Admission ID​

 

(0038,0010)​

IdentificationnumberoftheVisitasassignedbythehealthcare​

 

 

 

provider.​

Issuer of Admission ID Sequence​

 

(0038,0014)​

Identifier of the Assigning Authority that issued the Admission​

 

 

 

ID.​

 

 

 

Only a single Item shall be included in this Sequence.​

>IncludeTable10-17“HL7v2HierarchicDesignatorMacroAttributes”​

Service Episode ID​

 

(0038,0060)​

IdentifieroftheServiceEpisodeasassignedbythehealthcare​

 

 

 

provider​

IssuerofServiceEpisodeIDSequence​

(0038,0064)​

Identifier of the Assigning Authority that issued the Service​

 

 

 

Episode ID.​

 

 

 

Only a single Item shall be included in this Sequence.​

>IncludeTable10-17“HL7v2HierarchicDesignatorMacroAttributes”​

Service Episode Description​

 

(0038,0062)​

Description of the type of service episode.​

Scheduled Step Attributes Sequence​

(0040,0270)​

Sequence containing Attributes that are related to the​

 

 

 

scheduling of the Procedure Step.​

One or more Items shall be included in this Sequence.​

- Standard -​

DICOM PS3.3 2020a - Information Object Definitions​

Page 465​

Attribute Name​

Tag​

Attribute Description​

 

>Study Instance UID​

(0020,000D)​

Unique identifier for the Study.​

 

>Referenced Study Sequence​

(0008,1110)​

Uniquely identifies the Study SOP Instance associated with​

 

 

this Scheduled Procedure Step.​

 

 

 

Only a single Item shall be included in this Sequence.​

 

 

See Section 10.6.1.​

 

>>Include Table 10-11 “SOP Instance Reference Macro Attributes”​

 

 

>Accession Number​

(0008,0050)​

A departmental IS generated number that identifies the order​

 

 

for the Study.​

 

>Issuer of Accession Number​

(0008,0051)​

Identifier of the Assigning Authority that issued the Accession​

Sequence​

 

Number.​

 

 

 

Only a single Item shall be included in this Sequence.​

>>IncludeTable10-17“HL7v2HierarchicDesignatorMacroAttributes”​

 

>PlacerOrderNumber/ImagingService​

(0040,2016)​

The order number assigned to the Imaging Service Request​

Request​

 

by the party placing the order.​

 

>Order Placer Identifier Sequence​

(0040,0026)​

IdentifieroftheAssigningAuthoritythatissuedthePlacerOrder​

 

 

Number.​

 

 

 

Only a single Item shall be included in this Sequence.​

>>IncludeTable10-17“HL7v2HierarchicDesignatorMacroAttributes”​

 

>Filler Order Number/Imaging Service​

(0040,2017)​

The order number assigned to the Imaging Service Request​

Request​

 

by the party filling the order.​

 

>Order Filler Identifier Sequence​

(0040,0027)​

Identifier of the Assigning Authority that issued the Filler Order​

 

 

Number.​

 

 

 

Only a single Item shall be included in this Sequence.​

>>IncludeTable10-17“HL7v2HierarchicDesignatorMacroAttributes”​

 

>Requested Procedure ID​

(0040,1001)​

Identifier of the related Requested Procedure.​

 

>Requested Procedure Description​

(0032,1060)​

Institution-generatedadministrativedescriptionorclassification​

 

 

of Requested Procedure.​

 

>Requested Procedure Code​

(0032,1064)​

ASequencethatconveystheProcedureTypeoftherequested​

Sequence​

 

procedure.​

 

 

 

Only a single Item shall be included in this Sequence.​

>>Include Table 8.8-1 “Code Sequence Macro Attributes”​

No Baseline CID is defined.​

 

>Scheduled Procedure Step ID​

(0040,0009)​

Identifier of the related Scheduled Procedure Step.​

>Scheduled Procedure Step​

(0040,0007)​

Institution-generated description or classification of the​

Description​

 

Scheduled Procedure Step to be performed.​

 

>Scheduled Protocol Code Sequence​

(0040,0008)​

Sequence describing the Scheduled Protocol following a​

 

 

specific coding scheme.​

 

 

 

One or more Items shall be included in this Sequence.​

>>Include Table 8.8-1 “Code Sequence Macro Attributes”​

No Baseline CID is defined.​

 

>>Protocol Context Sequence​

(0040,0440)​

SequencethatspecifiesthecontextfortheScheduledProtocol​

Code Sequence (0040,0008) Item.​

One or more Items shall be included in this Sequence.​

See Section C.4.10.1.​

- Standard -​