Материал: Calculation of power electronics converters

         constant inverse current =0,8 mA;

         constant (or average) voltage=0,9 B;

         enviroment temperature rate: -60 - +30 ^o ’s depict the construction of this diod:

APPENDIX B

Reference data of throttle.to the calculated value of minimum available inductance of filter throttle L_{th min}=0,4*10^-3Gn and magnetization current I=3,2A I have chosen the throttle of type D201T.main parameters of this throttle:

typedimension of magnetowire ШЛ 5х5;

mass is equal to 40g.’s depict the construction of the given throttle:

B - The throttle of the type D201T

The dimensions of the throttle are the following:=12mm=25mm=14mm=27,5mm=4mm=29mm=M2,5

APPENDIX C

Reference data of transformer.to the given data and calculations I chose the transformer of type ТПП 273-127/220-50. Electrical parameters of the transformer are: = 220V - voltage on the primary winding= 127V - voltage on the secondary winding

I= 12A - output current

P= 960 Wt - power =50 Hz - frequencydimensions:= 50 mm= 81 mm = 92 mm= 10 mm= 88 mm= M5

Figure C - Construction of the transformer of the type ТПП 273-127/220-50

APPENDIX D

Reference data of clamped connection

D - Construction of the clamped connection

connection of type Б-324-4 are intended for wire joining and branches in electrotechnical circuits (power, management, signalizings, illuminations and others)of voltage 100 V and frequency 50 Hz.