Ashby R. D., Foglia T. A. Poly(hydroxyalkanoate) biosynthesis from triglyceride substrates // Appl Microbiol Biotechnol. – 1998. – V. 49. – P. 431–437.
Ashraf A. M., Gamal. S. S., Amany. H. H. II. Dielectric investigation of cold crystallization of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3- hydroxyvalerate) // Polymer. – 1999. – V. 40. – P. 5377–5391.
Asrar J., Pierre J. R. Nucleating agents for polyhydroxyalkanoates and other thermoplastic polyesters and methods for their production and use // US
Patent № 5 973 100.–1999.
Asrar J., Pierre J. Poly(hydroxyalkanoates) compositions and method of their use in the production of films // European Patent № 0996670А1. – 2000a.
Asrar J., D'Haene P. Polymer blends containing polyhydroxyalkanoates and compositions with good retention of elongation // US Patent № 6 191 203.
– 2001a.
Asrar J., D'Haene P. Modified polyhydroxyalkanoates for production of coatings and films // US Patent № 6 191 083. – 2001b.
Asrar J., K. J. Gruys. Biodegradable Polymer (Biopol®) // In: Series of Biopolymers in 10 vol. ( A. Steinbüchel, ed.) Wiley – VCY Verlag GmbH. – 2002. – Vol. 4. – P. 55–86.
Atkins T. W. Fabrication of microcapsules using poly(ethelene adipate) and a blend of poly(ethylene adipate) with poly(hydroxybutyrate-hydroxy- valerate): incorporation and release of bovine serum albumin // Biomaterials. – 1997. – V. 18. – P. 173–180.
Atkins T. W., Peacock S. J. The incorporation and release of bowine serum albumin from poly-hydroxybutyrate-hydroxyvalerate microcapsules // J. Microincapsulation. – 1996a. – V. 13. – P. 709–717.
Avella M., Martuscelli E. Poly(D-(-)-(3-hydroxybutyrate)/polyIethylenen oxide) blends: phase diagram, thermal and crystallization behavior // Polymer. – 1998. – V. 29. – P. 1731–1737.
Avella M., Martuscelli E., Greco P. Crystallization behavior of poly(ethylenen oxide) from poly-D-(-)-(3-hydroxybutyrate)/poly(ethylenen oxide): phase structuring, morphology and thermal behavior // Polymer. – 1991. – V. 32.
– P. 1647–1653.
Avelle M., Martuscelli E., Raimo M. Review Properties of blends and composites based on poly(3-hydroxy)butyrate (PHB) and poly(3-hydroxybutyrate- hydroxyvalerate) (PHBV) copolymers // J. Materials Science. – 2000 a. – V. 35. – P. 523–545.
Avelle M., Rota G. A., Martuscelli E., Raimo M., Sadocco P., Elegin G., Riva R. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and wheat straw fibre composites: thermal, mechanical properties and biodegradation behaviour // J. Materials Science. – 2000b. – V. 35. – P. 829–836.
Baptist J. N. Processing for preparing poly-β-hydroxybutyric acid // US Patent № 3 036 959. – 1962a.
285
Baptist J. N. Processing for preparing poly-β-hydroxybutyric acid // US Patent № 3 044 942. – 1962b.
Baptist J. N. Molded product containing poly-β-hydroxybutyric acid and method of making // US Patent № 3 107 172. – 1963.
Baptist J. N. Plasticized poly-β-hydroxybutyric acid and process // US Patent № 3 182 036 – 1965.
Baptist J. N., Ziegler J. B. Method of making absorbable surgical sutures from poly beta hydroxy acid // US Patent № 3 229 766. – 1965.
Barham G. N., Sanders J. K. M. Observation of mobile poly(β-hydroxybutyrate) in the storage granules of Methylobacterium AMI by in vivo 13C – NMR spectroscopy // FEBS Lett. – 1984. – V. 231. – P. 16–18.
Bear M. M., Leboucherdurand M. A., Langlois V., Lenz R. W., Goodwin S., Guerin P. Bacterial poly-3-hydroxyalkanoates with epoxy groups in the side chains // React. Funct. Polymers. – 1999. – V. 34. – P. 65–77.
Behrend D., Kaufmann T., Michalik I., Schmitz K. P. Effect of softening agents on biodegradation and biocompatibility of poly-beta-hydroxybutyric acid in vivo // Biomed. Tech. – 1998. – V. 43. – P. 430–431.
Behrend D., Nishan C., Kunzer C., Sass M., Schmitz K.–P. Resorble scaffold for tissue engineering. // Proc. Europen Medical and Biological Engineering Conference. / Med. Biol. Eng. Comput. – 1999. – V. 37 (Suppl.). – P. 1510–1511.
Behrend D., Kramer S., Schmitz K. P. Biodegradation and biocompatibility of resorbable poluester // Zetl. Interoke. Biomater // 2000. – P. 28–32.
Bertrand J.–L., Ramsay B. A., Ramsay J. A., Chavarie C. Biosynthesis of poly--hydroxyalkanoates from pentoses by Pseudomonas pseudoflava // Appl. Environ. Microbiol. – 1990. – V. 56. – P. 3133–3138.
Beumer G. J., van Blitterswijk C. A., Ponec M. Biocompatibility of a biodegradable matrix used as a skin substitute: an in vivo evaluation // Br. J. Addict Alcohol Other Drugs. – 1978. – V. 73, № 4. – P. 423–424.
Billingham № C., Henman T. J., HolmesP. A. Degradation and stabilization of polyesters of biological and synthetic origin // In: Development in Polymer Degradation (N. Grassie Ed.). Amsterdaam: Elsevier. – 1978. – V. 7. – P. 81–121.
Bioartificial organs. I. (A. Procop, D. Hunkelen, and A. D. Cherrington, eds.) // Annals of the New York Academy of Sciences. – 1997. –V. 831. – 476 p.
Bioartificial organs. II. (D. Hunkelen, A. Procop, and A. D. Cherrington, eds.) // Annals of the New York Academy of Sciences. – 1999. –V. 875. – 415 p.
Bioartificial Organs III. Tissue sourcing, immunoisolation, and clinical trials. (D. Hunkeler, A. Cherrington, A. Prokop, R. Rajotte Eds.). Annals of The New York Academy of Sciences / N. Y.: – 2001. – V. 944.
Biocompatibility polymers, metals, and composites. (N. Szycher Ed.), Technom. Publ. Co Inc., Lancaster. – 1983.
286
Biomedical polymers. (S. W. Shalaby Ed.), Hanser/Gardner Publ., Inc., Cincinnati. – 1994.
Bissery M. C., Puisieux F., Thies C. A study of process parameters in the making of microspheres by the solvent evaporation procedure // Third Exp. Cong. Int Technol. Pharm. – 1983. – V. 3. – P. 233–239.
Bissery M. C., Valeriale F., Thies C. In vitro and in vivo evaluation of CGNUloaded microspheres prepared from polylactide and polyhydroxybutyrate // In: Microspheres and Drug Therapy. Pharmacocological, Immunnological and Medical Aspects (S. S. Davis, L. Illum, J. G. McVie, E. Tomlinson, eds.). Amsterdam: Elsevier. – 1984a. – P. 217–227.
Bissery M. C., Valeriote F., Thies C. In vitro lomustine release from small poly(β-hydroxybutyrate) and poly(D, L-lactide) microsperes // Proc. Int. Symp. Controlled release Bioact. Mater. – 1984b. – V. II. – P. 25–26.
Bissery M. C., Valeriote F., Thies C. Fale and affect of CGNU – loaded microspheres made of poly(D, L-lactide) and poly(β-hydroxybutyrate) (PHB) in mice // Proc. Int. Symp. Controlled release Bioact. Mater. – 1985. – V. I2. – P. 181–182.
Biomedical polymers. Designed – to – degrade systems (Shaloby W. Shaloby, ed.). – Hanser Publishers, Minich Vienna. New York. – 1994. – 263 p.
Biomedical polymers. S. W. Shalaby (ed.). Hanser // Gardner Publ. Inc. Cincinnati. – 1994.
Bluhm T. L., Hamer G. K., Marchessault R. H., Fyfe C. A., Veregin R. P. Isodimorphiam in bacterial Poly(β-hydroxybutyrate-co-β-hyrdoxyvalerate) // Macromol. – 1986. – V. 19. – P. 2871–2876.
Blümm E., Owen A. J. Miscibillity, crystallization and melting of poly(3-hydroxy- butyrate)/poly(L-lactide) blends // Polymer. – 1995. – V. 36. – P. 4077– 4081.
Boeree № R., Dove J., Knowles J., Hastings G. Development of a degradable composite for orthopedic use: mechanical evaluation of a hydroxyapatite – polyhydroxybutyrate composite material // Biomaterials. – 1993. – V. 14. – P. 793–796.
Bonthrone K. M., Clauss J., Horowitz D. M., Hunter B. K., Sanders J. K. M. The biological and physical chemistry of poly-hydroxyalkanoates as seen by NMR spectroscopy // FEMS Microbiol. – 1992. – V. 103. – P. 269–277.
Borden M., Attawia M., Laurencin C. T. The sintered microsphere matrix for bone tissue engineering // J. Biomed. Mater. Res. – 2002. – V. 61, № 3. – P. 421–429.
Borkenhagen M., Stoll R. C., Suter U. W., Aebischer P. In vivo performance of a new biodegradable polyester system used as a nerve guidance channel // Biomaterials. – 1998. – V. 19, № 23. – P. 2155–2165.
Borman E. J, Leibner M., Beer B. Growth-associated production of polyhydroxybutyric acid by Azotobacter beijernckii from organic nitrogen substrates // Appl. Microbiol. Biotechnol. – 1998. – V. 48. – P. 84–88.
287
Boynton Z. L., Koon J. J., Brennan E. M., Clouart J. D., Horowitz D. M., Gerngross T. U., Huisman G. W. Reduction of Cell lysate viscosity during processing of poly(3-hydroxyalkanoates) by chromosomal integration of the staphylococcal nuclease gene in Pseudomonas putida // Appl. Microbiol. Biotechnol. –19999. – V. 65. – P. 1524–1529.
Bourque D., Ouellette B., Andre G., Groleau D. Production of poly- -hydroxy- butyrate from methanol: characterization of a new isolate of Methylobaterium extorquen // Appl. Microbiol. Biothecnol. –1992. – V. 37. – P. 7–12.
Bourque D, Pomerleau Y, Groleau D. High-cell-density production of poly- - hydroxybutyrate (PHB) from methanol by Methylobacterium extorquens: production of high molecular mass PHB // Appl. Microbiol. Biotechnol. – 1995. – V. 44. – P. 367–376.
Bowald S. F., Johansson E. G. A novel surgical material // Europen Patent Application № 0 349 505 A2. – 1990.
Bovey F. High Resolution NMR of macromolecules. N Y.: Acad. Press. 1972. № 4. – P. 124.
Brandl H., Gross R. A., Lenz R. W., Fuller C. W. Pseudomonas oleovorans as a source of Poly(β-hydroxyalkanoates) for potential application as biodegradable polyesters // Appl. Environ. Microbiol. – 1988. – V. 54. – P. 1977– 1982.
Brandl H., Gross R., Lenz R., Fuller R. Plastics from bacteria and for bacteria: poly(- -hydroxyalkanoates) as natural, biocompatible, and biodegradable polyesters // Adv. Biochem. Eng. Biotechnol. – 1990. – V. 41. – P. 77–93.
Braunegg G., Lefebvre G., Genzer K. F. Polyhydroxyalkanoates, biopolyesters from renewable resources: Physiological and engineering aspects (rewiew article) // J. of Biotechnol. –1998. – V. 65. – P. 127–161.
Brissova M., Lacik I., Powers A. C., Anilkumar A. C., Wang T. Control and measurement of permeability for design of microcapsule cell delivery system // J. Biomed. Mater. Research. – 1998. – V. 39. – P. 61–70.
Brophy M. R., Deasy P. In vitro and in vivo studies on biodegradable polyesters microparticles containing sulphamethizole // Int. J. Pharm. – 1986. – V. 29.
– P. 223–231.
Brucato C., Wong S. Extracellular poly(3-hydroxybutyrate) from Penicillum funiculosum: general characteristics and active // Arch. Biochem. Byophys.
– 1991. – V. 290. – P. 497–502.
Brückner S., Meille S. V., Malpezzi L., Cesaro A., Navarini L., Tomblini R. The structure of Poly(D-(-)-β-polyxydroxybutyrate). A refinement based on the Rietrveld method // Macromol. – 1988. – V. 21. – P. 967–972.
Brune H., Niemann E. Use and compatibility of bacterial protein (Hydrogenomonas) with various contents of poly-beta-hyrdoxybutyric acid in animal nutrition. I. Weight development and N balance in growing rats // Z. Tierphysiol. Tiereüht. Bull. – 1977a. – V. 38. – P. 12–22.
288
Brune H., Niemann E. Value and compatibility in animal nutrition of bacterial protein (Hydrogenomonas) containing various amount of poly-beta- hydroxybutyric acid 2. Body weight and nitrogen balance and fatty acid pattern of liver, muscle and kidney depot fat of growing swine // Z. Tierphysiol. Tiereüht. Bul. – 1977b. – V. 38. – P. 81–93.
Burpee V. F., Hackenberg R. W., Hillegas D. V. Acid phosphatase activity as enzymatic assent of the polymer – tissue compatibility // J. Biomed. Mater. Res. – 1978. – V. 12, № 5. – P. 767–771.
Byron D. Polymer synthesis by microorganisms: technology and economics // Trends Biotechnol. – 1987. – V. 5. – P. 246–250.
Byron D.(ed.) Biomaterials: novel materials from biological sources // Stockton, New York. – 1989.
Byron D. Production of poly- -hydroxybutyrate: polyhydroxyvalerate copolymers // FEMS Microbiol. Rev. – 1992. – V. 103. – P. 247–250.
Byron D. Polyhydroxyalkanoates // In: D. P. Mobley, ed. Plastics from microbes: microbial synthesis of polymers and polymer precursors. Hanser Munich. – 1994. – P. 5–33.
Cammas S., Bear M. M., Moine L., Escalup R., Ponchel G., Kataoka K., Guerin Ph. Polymers of malic and 3-alkylmalic acid as synthetic PHA in the design of biocompatible hydrolysable devices // Int. J. of Biol. Macromol. – 1999. – V. 25, № 1–3. – P. 273–282.
Cao A., Arai Y., Yoshie № , Kasuya K.–I., Doi Y., Inoue Y. Solid structure and biodegradation of the compositionally fractionated poly(3-hydroxybutyric acid-co- 3-hydroxypropionic acids) // Polymer. – 1999. – V. 40. – P. 6821–6830.
Canetti M., Urso M., Sadocco P. Influence of the morphology and of the supermolecular structure on the enzymatic degradation of bacterial poly(3- hydroxybutyrate) // Polymer. – 1999. – V. 40. – P. 2587–2594.
Catcheside D. E. A., Ralph J. P. Biological processing of coal // Appl. Microbiol. Biotechnol. – 1999. – V. 52. – P. 16–24.
Cevallos, M. A., Encarnocion S., Leija A., Mora Y., Mora J. Genetic and physiological characterization of a Rhizobium etli mutant strain unable to synthesize poly– -hydroxybutyrate // J. Bacteriol. – 1996. – V. 178. – P. 1646– 1654.
Chaput C., Des Rosiers E. A., Assad M., Brochu M., Yahia L., Selmani A., Rivard C. Processing biodegradable natural polyesters for porous soft materials // NATO ASI Ser. – 1995a. – V. 294. – P. 229–245.
Chaput C., Yahia L., Selmani A., Rivard C., Mater C. Natural Poly(hydroxybuty- rate-hydroxyvalerate) polymers as degradable biomaterials // Res. Soc. Symp. Proc. – 1995b. – V. 394. – P. 111–116.
Chen C., Chen S. C. // US Patent № 5 116 868.–1992.
Chen Y., Yang G., Chen Q. Solid state NMR study on the structure and mobility of the noncrystalline region of poly(3-hydroxybutyrate) and poly(3-
289